How to use the Parameter Editor for TL-206?
1. Run "USB Driver";
2. Connect the USB Cable and Adaptor with your computer (Don't connect the GPS Tracker at this step);
3. Check the right comm port;
4. Insert SIM card and turn on the device;
After Red and Yellow light blinking normally
5. Connect other hand of USB Cable to the device;
Green LED Blinking quickly
6. Press "CALL 1" Button
Green LED Blinking normally
7. Run"GPS Tracker Parameter Editor"
8. Choose the right Comm Port on parameter editor
9. Select a model "TL201/6"
10. Click "Read All Parameter"
11. Set other parameter